The Tornador works on the principle of using compressed air to create a powerful cyclonic cleaning action. Here’s a detailed explanation of how the Tornador operates and its key components:

Components of the Tornador:

1. Air Compressor Connection:

   • The Tornador is connected to an air compressor via an air hose. The air compressor provides the necessary compressed air at a controlled pressure (typically 60-90 PSI) to power the Tornador.

2. Cone-Shaped Nozzle:

   • At the front end of the Tornador, there is a cone-shaped nozzle. This nozzle is designed to atomize cleaning solution into a fine mist when air is passed through it.

3. Reservoir and Solution Tube:

   • The Tornador has a reservoir or canister where a cleaning solution is stored. A tube connects this reservoir to the nozzle, allowing the cleaning solution to be mixed with the compressed air as it passes through the nozzle.

Operation of the Tornador:

1. Setup:

   • Connect the Tornador to the air compressor using the air hose. Ensure the air compressor is set to the appropriate pressure for the Tornador (as recommended by the manufacturer).

2. Filling the Reservoir:

   • Fill the reservoir of the Tornador with a suitable cleaning solution. The type of solution used depends on the specific cleaning task and the surface being cleaned (e.g., upholstery cleaner, degreaser for engine bays, etc.).

3. Trigger Operation:

   • Hold the Tornador with one hand and squeeze the trigger located near the handle. This action releases a mist of the cleaning solution combined with the compressed air through the nozzle.

4. Cleaning Action:

   • As the mist of cleaning solution and air exits the nozzle, it creates a powerful cyclonic effect. This effect agitates and lifts dirt, dust, and grime from the surface being cleaned.

5. Effective Cleaning:

   • The high-velocity mist penetrates into hard-to-reach areas, such as crevices, vents, and upholstery fibers, dislodging contaminants and lifting them away from the surface.

6. Drying or Wiping:

   • Depending on the cleaning task, after applying the Tornador, you may need to wipe away excess moisture and loosened dirt with a microfiber towel or vacuum it up.

Benefits of Using Tornador:

• Efficiency: The Tornador reduces cleaning time compared to traditional methods, as it cleans and dries surfaces quickly.
• Versatility: It can be used for a variety of cleaning tasks inside and outside the vehicle, from upholstery and carpets to engines and wheels.
• Thorough Cleaning: Provides thorough cleaning even in hard-to-reach areas where manual cleaning might be difficult.
• Professional Results: Helps achieve professional-level cleaning results with minimal effort.

Considerations:

• Air Compressor Requirement: Requires access to an air compressor with appropriate pressure for effective operation.
• Surface Compatibility: While versatile, care should be taken with delicate surfaces to avoid damage. Adjust the air pressure and use appropriate cleaning solutions as needed.

The Tornador is a popular tool among professional detailers and automotive enthusiasts for its effectiveness and versatility in achieving deep cleaning results across various surfaces of the vehicle.