Using a classic cleaning gun, such as the Tornador Classic or similar models, involves a straightforward process to effectively clean various surfaces. Here’s a step-by-step guide on how to use a cleaning gun classic:

Preparation:

1. Prepare the Area: Clear the area of loose items and debris. Vacuum the surfaces to remove loose dirt and dust.

2. Prepare the Cleaning Solution: Fill the reservoir of the cleaning gun with an appropriate cleaning solution. This could be a diluted all-purpose cleaner, interior cleaner for cars, or a solution specific to the surface you are cleaning.

3. Connect to Air Compressor: Connect the cleaning gun to an air compressor that provides the recommended PSI (typically 60-90 PSI) for optimal cleaning performance.

Application:

4. Test and Adjust: Before starting, test the cleaning gun in a small, inconspicuous area to ensure the pressure and cleaning solution mixture are appropriate and do not cause damage.

5. Spray and Clean: Hold the cleaning gun nozzle a few inches away from the surface. Squeeze the trigger to release the cleaning solution in short bursts. Move the nozzle in overlapping passes to cover the entire area evenly.

6. Agitate if Necessary: For stubborn stains or heavily soiled areas, use a soft-bristled brush to agitate the cleaning solution after applying with the cleaning gun. This helps to loosen dirt and stains effectively.

7. Extract or Wipe Off: After applying the cleaning solution, use a microfiber towel or a wet/dry vacuum cleaner to extract the dirty solution and residues from the surfaces. Alternatively, wipe off excess moisture and dirt with clean microfiber towels.

Finishing:

8. Dry and Finish: Allow the cleaned surfaces to air dry completely before using the area again. Apply interior dressing or protectant as needed to vinyl, plastic, and leather surfaces for added protection and shine.

9. Clean and Maintain: After use, clean the cleaning gun according to the manufacturer's instructions. Proper maintenance ensures longevity and efficient operation of the tool.

Safety Tips:

• Always wear appropriate eye protection and gloves when using cleaning guns.
• Ensure proper ventilation when working in confined spaces to avoid inhaling cleaning fumes.
• Follow all safety guidelines and recommendations provided by the manufacturer.

By following these steps, you can effectively use a cleaning gun classic to clean and refresh various surfaces in your car or other applications. Adjust the cleaning solution concentration and technique based on the specific surfaces and cleaning requirements for optimal results.