How to use clay towel decontamination towel

Directions
Wash vehicle to remove loose dirt and debris.
Spray your preferred clay lubricant on a small section of the vehicle.
Gently rub the Ultra Clay Towel or Mitt over the lubricated area until contaminants are removed and surface is smooth. ...
Follow with Your Favorite Wax, Sealant, or move onto compound/polish.

Using a clay towel for decontaminating your car's surface is a great way to remove embedded dirt and contaminants. Here’s a step-by-step guide:

Step-by-Step Guide to Using a Clay Towel

What You'll Need:

  • Clay towel
  • Spray lubricant (specific for clay bars/towels or a detailing spray)
  • Microfiber towels
  • Wash bucket with car soap (optional, for pre-wash)

Steps:

  1. Preparation:

    • Wash Your Car: Start by washing your car to remove any loose dirt and debris. Use a proper car wash soap and microfiber mitt. Rinse thoroughly and dry the vehicle.
    • Find a Shady Area: Work in a shaded or cool area to prevent the lubricant from drying out too quickly.
  2. Gather Materials:

    • Have your clay towel, spray lubricant, and microfiber towels ready.
  3. Apply Lubricant:

    • Generously spray the area you plan to decontaminate with the lubricant. Make sure it's evenly coated; this will help the clay towel glide smoothly.
  4. Using the Clay Towel:

    • Gently Wipe: Take the clay towel and gently wipe it over the lubricated area using straight, back-and-forth motions. Avoid circular motions, as they can cause marring.
    • Feel for Smoothness: As you wipe, you’ll feel the towel picking up contaminants. Once the surface feels smooth to the touch, that area is decontaminated.
  5. Check the Towel:

    • After a few passes, check the clay towel for dirt. If it gets too dirty, you can fold it to a clean section or rinse it with water to remove contaminants.
  6. Wipe Down:

    • After you’ve finished an area, use a clean microfiber towel to wipe off any excess lubricant.
  7. Repeat:

    • Continue this process over the entire vehicle, working in sections. Make sure to keep the surface lubricated throughout.
  8. Final Steps:

    • Once you’re done, wash the clay towel according to the manufacturer's instructions to keep it in good condition.
    • Optionally, you can follow up with a wax or sealant to protect the paint.

Tips:

  • Always ensure the surface is well lubricated; this is crucial to avoid scratching the paint.
  • If you're working on a particularly dirty surface, you might want to wash the area again after claying to remove any residual contaminants.

By following these steps, you’ll leave your car’s paint feeling smooth and looking great!

Car Wash Tools Tornador New System Clean Gun.....

Car Wash Tools Tornador New System Clean Gun.....