Using a foam cannon is a straightforward process that enhances your car washing routine. Here’s a step-by-step guide:

1. Gather Supplies:

• Foam cannon
• Pressure washer (if using a cannon compatible with it)
• Car wash soap (preferably pH-balanced)
• Bucket and wash mitt (for rinsing)

2. Prepare the Foam Cannon:

• Fill the foam cannon’s tank with water, then add the recommended amount of car wash soap (usually about 1-2 ounces, but check the soap’s instructions).
• Adjust the soap-to-water ratio if your cannon has that option.

3. Connect to Pressure Washer:

• Attach the foam cannon to your pressure washer wand securely.

4. Rinse the Car:

• Before foaming, rinse the car to remove loose dirt and debris.

5. Apply Foam:

• Spray the foam evenly across the car’s surface, starting from the top and working your way down. This helps the foam cling to dirt for effective cleaning.

6. Let It Sit:

• Allow the foam to dwell for a few minutes (avoid letting it dry) to break down grime and contaminants.

7. Rinse Again:

• Rinse off the foam thoroughly with the pressure washer, starting from the top and working down.

8. Wash the Car:

• Use a wash mitt and bucket of soapy water to hand wash the car, focusing on areas that need extra attention.

9. Final Rinse:

• Rinse the car thoroughly to remove all soap residue.

10. Dry the Car:

• Use a microfiber towel or drying towel to dry the surface, preventing water spots.

Using a foam cannon not only saves time but also makes the washing process more enjoyable! If you have specific questions about any step, feel free to ask!