How to Remove Rail Dust with CarPro IronX and a Clay Bar?
Removing railroad dust from your vehicle is an important step in maintaining its paint finish, especially if you frequently park near train tracks or live in an area with common rail traffic. Railroad dust consists of tiny metal particles that can become embedded in paint, causing rust and surface imperfections.
Here’s how to effectively remove railroad dust using CarPro IronX and a clay bar:
Required materials
- CarPro IronX: A specialized iron remover that helps dissolve embedded metal particles.
- Clay Bar: High quality clay bar designed specifically for car paint.
- Detailing Spray or Lubricant: Use with a clay bar for lubrication.
- Microfiber Towel: For drying and wiping surfaces.
- Bucket and Water: For flushing the car.
- Protective Gloves: Protect your hands from chemicals.
Step by step process
1. Car Wash
- Start by giving the car a thorough wash to remove any loose dirt and grime. Use a pH-balanced car wash soap and rinse well.
2. Dry the car
- Use a microfiber towel to dry the vehicle to prevent water stains. Make sure the surface is clean and dry before proceeding.
3. Apply CarPro IronX
- Spray IronX: Spray CarPro IronX liberally onto affected paint areas, focusing on areas where you suspect rail dust is present.
- LET IT STAY: Let the product sit for a few minutes (per manufacturer’s instructions) to break down the iron particles. You’ll notice a color change (usually purple) as it reacts with the iron.
4. Rinse the ironX
- After the dwell time, rinse the area thoroughly with water to remove IronX and any dissolved contaminants.
5. Prepare the clay bar
- Take your clay bar and knead it until it becomes soft and pliable. If it gets dirty, you can fold it to expose the clean side.
6. Lubricated surface
- Spray detailing spray or lubricant onto the small area of the paint where you will use the clay stick. This helps prevent scratches.
7. Use Clay Bar
- Gently slide the clay bar back and forth onto the lubricated area. As the clay absorbs contaminants, you should feel the surface become smoother.
- Check the clay bar frequently for dirt and fold it as needed to reveal the clean side.
8. Wipe the area
- After applying clay, wipe the area with a clean microfiber towel to remove any residue of lubricant and contaminants.
9. Check the surface
- Check the surface for residual rail dust or defects. If necessary, repeat the IronX and Clay Bar process on any stubborn areas.
10. Final rinse and dry
- Once you are satisfied with the results, give the car a final rinse and dry thoroughly.
11. Protect paint
- After removing track dust, consider using a wax or sealant to protect the paint and enhance its shine.
in conclusion
Using CarPro IronX with a clay bar is an effective way to remove railroad dust and other embedded contaminants from your vehicle’s paint. Regular maintenance, including this procedure, will help keep your car in top condition and protect it from potential damage.