How to Fix and Make Cleaning Gun Cleaner Pipe Yourself | BrilliaTech Certified Solutions

A cleaning gun is a powerful tool for car detailing, workshop cleaning, and industrial use. But over time, the cleaner pipe (air/liquid pipe inside the gun) may get clogged, cracked, or loose. Instead of replacing the entire gun, you can fix the cleaner pipe yourself at home with a few simple steps.

At BrilliaTech, we manufacture cleaning guns with SGS, ISO, and BSCI certifications, ensuring quality, durability, and international compliance. Whether you are a DIY user or a professional detailer, maintaining your cleaning gun can save costs and improve performance.

To fix a cleaning gun cleaner pipe yourself, you can follow these general steps. Please note that the exact method may vary depending on the specific model and design of your cleaning gun:

1. Identify the Issue: Determine where the cleaner pipe is damaged or leaking. Inspect the entire length of the pipe to locate any cracks, breaks, or loose fittings.

2. Gather Materials: Prepare the necessary tools and materials, which may include replacement tubing (if needed), hose clamps, pliers, screwdrivers, and possibly a utility knife.

3. Disconnect the Pipe: If necessary, disconnect the damaged cleaner pipe from the cleaning gun and the reservoir or air compressor. Release any pressure from the system if it's pressurized.

4. Cut and Replace: If the cleaner pipe is damaged beyond repair, cut out the damaged section using a utility knife or scissors. Measure and cut a new piece of tubing to the appropriate length.

5. Connect New Tubing: Attach the new tubing to the fittings on both ends. Use hose clamps or appropriate connectors to secure the tubing firmly in place. Ensure there are no kinks or sharp bends that could restrict the flow of cleaning solution or air.

6. Test the Repair: Reconnect the cleaning gun to the air compressor or reservoir. Test the repaired cleaner pipe by spraying water or cleaning solution through the gun to check for leaks or any issues with pressure and flow.

7. Adjust and Secure: Once satisfied with the repair, adjust the fittings and hose clamps as needed to ensure everything is securely fastened.

8. Final Check: Conduct a final inspection to ensure there are no leaks and that the repaired cleaner pipe functions properly.

If the cleaning gun uses specialized or proprietary parts, it may be advisable to consult the manufacturer's instructions or contact their customer support for specific guidance on repairing or replacing components. This ensures the cleaning gun continues to operate safely and effectively.

Why Cleaning Gun Pipes Fail?

• Clogging due to dirt, grease, or hard water deposits

• Leaks from loose connections or worn-out seals

• Cracks in plastic or rubber tubes after long-term use

• Airflow issues caused by debris blocking the nozzle

DIY Steps: Fixing a Cleaning Gun Cleaner Pipe

1. Disassemble the Cleaning Gun

Remove the cleaner gun from the compressor and carefully open the housing. Take out the pipe and nozzle section.

2. Inspect the Pipe

Check if the pipe is clogged, cracked, or disconnected.

3. Clean the Pipe

• Use a thin wire or pipe brush to remove debris

• Flush with warm water + mild detergent

• Rinse thoroughly and let it dry

4. Seal or Replace

• For minor cracks, apply silicone sealant or Teflon tape

• For serious damage, replace with a compatible BrilliaTech spare pipe

5. Reassemble & Test

Reconnect the pipe, tighten all joints, and test the gun with air + cleaning solution.

Benefits of BrilliaTech Cleaning Guns

BrilliaTech is a leading factory specializing in cleaning gun production. Our products are trusted worldwide due to:

• SGS Certified: Verified safety and performance

• ISO Approved: Consistent quality management

• BSCI Certified: Ethical and sustainable manufacturing

• Durable Materials: Resistant to cracks and wear

• Global Export Experience: Widely used in auto detailing, workshops, and industry

FAQs

Q1: Can I use any spare pipe for my cleaning gun?

Not always. Using BrilliaTech original spare parts ensures perfect fit and long-lasting performance.

Q2: What if the pipe keeps clogging?

Try using filtered water or cleaning liquid to avoid mineral buildup. Regular flushing helps.

Q3: How often should I service my cleaning gun?

Every 2-3 months for heavy use, and every 6 months for casual use.

Q4: Why choose BrilliaTech cleaning guns?

Because BrilliaTech offers factory-direct, SGS/ISO/BSCI certified products, ensuring safety, reliability, and international standards.

With proper care, you can fix your cleaning gun cleaner pipe yourself and extend the tool’s lifespan. For replacement parts or professional-grade cleaning guns, choose BrilliaTech – your certified cleaning equipment partner.