Make sure to apply the product on a cool clean surface and out of direct sunlight. Apply the compound onto a damp applicator pad or a cotton towel over a small area at a time. Rub the product into the surface using back and forth motion.

Before applying Turtle Wax polishing compound, make sure the car is clean and dry. Use a foam applicator or a buffer, apply a small amount of the compound, and work it into the paint in a circular motion. Start with a small section, applying light pressure, and then buff it out with a clean microfiber cloth. 

How do you apply turtle wax polishing compound?

Dispense Turtle Wax Clean Cut Rubbing Compound on the applicator pad and apply it onto the surface without turning the DA polisher on to spread the product.

Tips on removing any specific imperfections

To remove specific imperfections like scratches or swirl marks, start by using a more abrasive polish if the Turtle Wax compound isn't effective. Apply it to the affected area using a foam pad and work it in slowly. For deeper scratches, consider using a scratch repair pen first. Always follow up with a finer polish to restore gloss.  

For swirl marks, use a polishing compound with a foam pad and work in small sections. For deeper scratches, consider a finer compound or scratch remover, applying it carefully to the affected area. Always follow up with a wax or sealant to protect the finish.

To remove specific imperfections like swirl marks, light scratches, or oxidation with Turtle Wax polishing compound, follow these tips:

1. Swirl Marks:

Use a foam pad and apply the compound directly to the pad.

Work in a small section (2x2 feet) using a dual-action polisher or by hand in a circular motion.

Apply moderate pressure and make several passes, then buff off with a clean microfiber cloth.

1. Light Scratches:

For deeper scratches, apply more compound directly to the scratch.

Use a microfiber applicator to work it in, focusing on the scratch. Be patient and allow the compound to break down.

Wipe away the residue and check the scratch. If needed, repeat until it’s less visible.

1. Oxidation:

Use a medium to heavy cutting pad with the polishing compound.

Work on small areas, applying the compound and buffing it in until the surface looks clearer.

Finish with a finer polish for a smooth, glossy finish.

Always test in an inconspicuous area first, and remember to follow up with a good wax to protect the paint afterward! Let me know if you need more details on any step!

How do you use a Turtle Wax polisher?

Apply compound onto a damp applicator or cotton towel over a small area, rub into surface using a back and forth motion. Remove excess cleaner before it dries. Buff lightly with a clean, dry cloth.

What is the difference between Turtle Wax rubbing compound and polishing compound?

Rubbing compounds correct uneven surfaces caused by scratches, while polishing adds smoothness and shine. Rubbing compound is used to restore old paintwork, and acts as a new top coat. You can easily apply rubbing compound with a powered polisher or microfiber cloth to bring dull or damaged paint back to life!