Here’s a step-by-step guide on how to use the AutoFiber Premium Detailing Clay Mitt:

1. Prepare Your Vehicle: Start with a clean vehicle. Wash and dry the surface to remove any loose dirt and debris.

2. Choose a Clay Lubricant: Select a clay lubricant, such as a detailing spray or a dedicated clay lube. This will help the mitt glide smoothly over the surface.

3. Apply the Lubricant: Spray a generous amount of lubricant onto a small section of the vehicle's paint. It’s essential to keep the surface lubricated to prevent scratching.

4. Use the Clay Mitt: With the AutoFiber Premium Detailing Clay Mitt, gently rub it back and forth over the lubricated area. Use light pressure and a smooth motion, working in straight lines. Don’t apply too much force; let the mitt do the work.

5. Check the Surface: After a few passes, check the area for smoothness. You should feel a noticeable difference as contaminants are lifted.

6. Wipe Off Residue: Use a clean microfiber towel to wipe away any excess lubricant and contaminants from the surface.

7. Rinse the Mitt: Periodically rinse the mitt under running water to remove trapped contaminants and maintain its effectiveness.

8. Repeat: Move on to the next section of the vehicle and repeat the process until the entire surface is decontaminated.

9. Final Touch: After using the mitt on the entire vehicle, consider applying a wax or sealant to protect the newly cleaned surface.

10. Care for the Mitt: Rinse the mitt thoroughly after use and let it air dry. Store it in a clean, dry place to maintain its condition.

Using the AutoFiber Premium Detailing Clay Mitt can significantly improve your vehicle’s finish by removing embedded contaminants. Let me know if you have any other questions!