To effectively use a Tornador or similar cleaning gun, you'll need a suitable air compressor, air hoses or tubes, and connectors. Here's what you typically need to assemble the setup:

1. Air Compressor:

   • Type: Choose a compressor that provides the required air pressure (60-90 PSI for Tornador) and sufficient air volume (CFM) to maintain consistent operation.
   • Size: Consider the tank size for continuous airflow and whether you need a portable or stationary compressor.
   • Power Source: Decide between electric-powered (for indoor use) or gasoline-powered (for outdoor or remote use) based on your needs.

2. Air Hoses or Tubes:

   • Material: Opt for durable hoses made from materials like PVC or rubber that can handle the pressure and airflow required by the cleaning gun.
   • Length: Ensure the hose length is sufficient for your workspace or mobile cleaning needs.
   • Diameter: Typically, 1/4 inch or 3/8 inch hoses are standard for pneumatic tools like cleaning guns.

3. Connectors:

   • Quick Connectors: Choose connectors (often 1/4 inch or 3/8 inch) compatible with your air hoses and compressor fittings.
   • Style: Select connectors based on your region or the specific type used by your cleaning gun or compressor (e.g., standard quick connectors, industrial interchange couplers).
   • Compatibility: Ensure all components (hoses, connectors, and compressor fittings) are compatible to prevent air leaks and ensure efficient operation.

4. Additional Considerations:

   • Regulators and Filters: Install an air regulator to adjust and maintain the correct pressure for your cleaning gun. Consider adding filters to remove moisture and contaminants from the air supply, which can improve gun performance and longevity.
   • Safety: Follow safety guidelines for compressor use, including proper ventilation, grounding, and maintenance to ensure safe operation.

When assembling your setup, refer to the manufacturer's specifications for your Tornador cleaning gun to ensure all components meet the required pressure and airflow standards. If you're uncertain about compatibility or need specific recommendations, consulting with a supplier specializing in pneumatic tools or contacting the cleaning gun manufacturer directly can provide tailored guidance for your setup.